CAMK75900 Gariiradda Qalinka ah ee Nickel ama Bar
Magacaabista Agabka
| GB | BZN18-20 |
| UNS | C75900 |
| EN | CuNi18Zn20 |
| JIS | / |
Halabuurka Kiimikada
| Copper, Ku | 60.0 - 65.0% |
| Nickel, Ni | 17.0 - 19.0% |
| Zinc, Zn | Rem. |
Guryaha
| Cufnaanta | 8.73 g/cm3 |
| Waxqabadka Korontada | 6% IACS |
| Habdhaqanka kulaylka | 30 W/( m·K) |
| Waxtarka kuleyl Balaadhinta | 16.5 μm/(m·K) |
| Qaabka Elasticity | 132 GB |
| Qabow Shaqayn | Aad u fiican |
| Shaqo Kulul | Cadaalad |
| Mashiinka (C36000 = 100%) | 25% |
| Mashiinka (C36000 = 100%) | Aad u fiican |
| Korantada | Aad u fiican |
| Alxanka iska caabinta (Butt alxanka) | Aad u fiican |
| Alxan adag | Aad u fiican |
| Gaaska Inert Alxanka Arc | Cadaalad |
Astaamaha
Daawahaani waa qalinka nikkel-la'aanta macdanta rasaasta kaas oo leh midab qalin ah iyo iska caabin wanaagsan oo wasakheynta ah, leh waxqabadka qabow ee wanaagsan ee shaqada, xoog sare iyo barti aad u sarreeya, Lacagta Nickel-ka waxaa lagu gartaa caabbinta heerkulka wanaagsan ee lagama maarmaanka u ah alxanka iyo alxanka.
Codsiga
Inta badan loo isticmaalo gaashaammada warshadaha elektiroonigga ah, qolofka resonator, qaab-dhismeedka biraha sida rivets, boolal, miiska, qaybaha qaansada, qaybaha kamaradaha, qaab-dhismeedka iyo qaybaha kale ee indhaha, iyo sidoo kale muraayadaha muraayadaha, taarikada magacyada, qaybaha godan, saldhigyada xardhan, garaaca raadiyaha iyo warshadaha qalabka muusikada.
Guryaha Makaanikada
| Tilmaamid mm (ilaa) | xanaaq | Xoogga Jilicsan Min.MPa | Xoogga Wax-soo-saarka Min.MPa | Dheeraynta Min.A% | Adag Min.HV5 |
| GOOSKA φ 0.5-15.0 | H01 | 440 | / | / | 90 |
| H02 | 550 | / | / | 140 | |
| H03 | 600 | / | / | 160 | |
| H04 | 650 | / | / | 180 | |
| H06 | 700 | / | / | 190 | |
| Ushii | H04 | 500 | / | / | 150 |
Faa'iidada
1. Waxaan si firfircoon uga jawaabnaa su'aalo kasta oo ka yimaada macaamiisha waxaanan bixinaa waqtiyo gaaban oo gaaban.Haddii macaamiishu ay qabaan baahiyo degdeg ah, si buuxda ayaan ula shaqayn doonnaa.
2. Waxaan diirada saareynaa xakameynta habka wax soo saarka si waxqabadka dufc kasta uu u noqdo mid joogto ah oo suurtogal ah tayada badeecaduna ay tahay mid aad u fiican.
3. Waxaan la shaqeyneynaa kuwa ugu wanaagsan ee xamuulka qaada ee gudaha si aan macaamiisha u siino badda, tareenada iyo gaadiidka hawada iyo xalalka isku dhafan ee gaadiidka, waxaanan leenahay qorshayaal ku saabsan dhibaatooyinka gaadiidka ee ay sababaan masiibooyinka dabiiciga ah, cudurrada faafa, dagaallada iyo arrimo kale.